Ningbo Sabe Machinery Manufacturing
DOT Air Brake Fittings For Copper Tubing, Parker Air Brake AB Fitting

 

DOT Air Brake Fittings For Copper Tubing

Conformance - Meets specifications and standards of SAE J246 and DOT FMVSS 571.106.

Applications

Use with copper tubing in air brake systems.

Features

  1. Construction - Three piece unit: body, long nut and spherical sleeve. Extruded(CA360) and Forged(CA377) Configuration.
  2. Vibration resistance - Fair resistance.
  3. Advantages - Easy to assemble (no tube preparation or flaring required.) 13XX series bodies (with tube support) could interchange with 14xx series(DOT Air Brake Fittings For Nylon Tubing) bodies for using with nylon tubing (SAE J844 Type A and B).

Specification

  1. Temperature Range: Fittings will withstand variations from -65°F to +250°F (-53°C to +121°C)
  2. Working Pressure: Maximum operating pressure of 150 psi.

Assembly Instructions

DOT Air Brake Fitting(Copper Tubing)

  1. Cut tubing to desired length squarely and remove burrs.
  2. Slide nut and sleeve onto tubing.
  3. Insert tubing into fitting until bottomed on fitting shoulder. The nut should be screwed down until it is hand tight, then wrench-tightened as indicated below
Tube Size (O.D) 1/4" 3/8" 1/2" 5/8" 3/4"
Thread Size 7/16-24 17/32-24 11/16-20 13/16-18 1-18
Additional Turns From Hand Tight 1-3/4 ~ 2 1-3/4 ~ 2 1-3/4 ~ 2 3 ~ 3-1/4 3 ~ 3-1/4
  • 1360 Sleeve
    Sleeve
  • 1361 Nut
    Nut
  • 1368 Male Pipe Adaptor
    Male Pipe Adaptor
  • 1380 45° Elbow Male Adapter
    45° Elbow Male Adapter
  • 1369 Male Connector Elbow
    Male Connector Elbow
  • 1366 Female Connector
    Female Connector
  • 1370 Female Adapter Elbow
    Female Adapter Elbow
  • 1362 Union
    Union
  • 1374 Bulkhead Union
    Bulkhead Union
  • 1365 Union Elbow
    Union Elbow
  • 1364 Union Tee
    Union Tee
  • 1372 Male Branch Tee
    Male Branch Tee
  • 1371 Male Run Tee
    Male Run Tee